Fire Flow Test
If you are required to have a Fire Flow Test prior to development plan approval, please follow the procedures as listed below (NOTE: CCWS can only test fire hydrants on public r.o.w. within its jurisdiction):
Submit the attached application with all applicable data to the Cobb County Water System, Engineering & Records Division along with:
A. An 8½" X 11" location map that clearly shows the site location. (Aero Atlas quality or go to Cobb County GIS Homepage).
B. A check for $100.00 made payable to the
Cobb County Water System
660 South Cobb Dr. Marietta, GA 30060.
It may take up to three (3) weeks to complete the Fire Flow Test, depending on weather and other factors. A Fire Flow test is required for all projects. Copies of the Fire Flow Test must be shown on the plans. The test cannot be over 6 months old.
The 24-hour clock will not be provided by Cobb County. The Design Engineer will be responsible for providing a 24-hour pressure recording if/when required by the Fire Department.
Construction plans cannot be approved without the Fire Flow Test results being on the water plans. Please consider this when preparing your development schedule.
Water & Sewer Availability
Information pertaining to the availability of water and sewer can be obtained by calling our office at 770-419-6328.
Map / As-Built
Maps and As-Builts can be obtained on a limited basis by visiting our office at 660 South Cobb Dr., Marietta, GA. There is a minimal charge for reproduction cost on maps. See chart below.
|8 1/2" x 11"||$1.00|
|11" x 17"||$2.00|
|24" x 36"||$9.00|
|Custom||$1.50 / sf|
The goal of the GIS staff is to accurately map Cobb County Water System water, wastewater and stormwater infrastructure systems. GIS data are utilized to support multiple divisions within the Water System.
- GPS Support
- As-Built record management
- Water and Sewer availability determination
- Fire Flow test applications
- Custom maps
- Data analysis
- Infrastructure mapping